First:Technical Data

Second:Specification

1.Steel welded structure, stress elimination by vibration, high mechanical strength, and exceptional rigidity.

2.Hydraulic top-drive, steady and reliable.

3.Mechanical stop and steel torsion bar to maintain synchronization and high precision.

4.Electric adjustment, manual fine adjustment, and digital display for backgauge distance and stroke of up ram.

5.Deflection compensation unit installed on the up die or on the down die if the operating pressure is 63t or above.

6.Safe fence and the electric interlocker have been designed for the machine to ensure the operation safety.

7.The drive element of backgauge adopts imported ball screw and linear guideway.

8.The equipment automatic hydraulic crowning system can compensate the bending tolerance caused by the ram torsion.

9.Electric box:power off when open the door.

Third:Stndard export equipments

If you ask for CNC control system,we have E200,DA41,DA52 to choose from.

Four:Pictures of machines and factory

cnc hydraulic Press brake Hydraulic system:

-A complete electrolyte servo synchro CNC (Computer Numerical Control) controlled press brake.

-Adopt Bosch electro hydraulic  servo system (from Germany)

Mechanical system:

- Two light rulers are installed at the two ends of the slide, making the slide movement be parallel to the working table

- Adopt the working table compensation structure.

- The CNC servo motor of the back gauge gives a high positioning accuracy.

cnc hydraulic Press brake CNC system:

-Programming of the axes positions in tabular mode with automatic syntactical checks, automatic calculation of the bending and bending tonnage.

- All programs, tools description, parameters can be stored on the internal memory or on USB memory stick.

  These files can be exchanged with other CNC and PC troughUSB memory stick.

- Complete graphic off-line programming on a standard PC, through a simulation program.

- Customizable alarm messages.

cnc hydraulic Press brake Synchro control system:

-Two light rulers (Y1-Y2) have been installed at the two sides of the machine to measure the exact distances.

-The position data will be delivered to the CNC system and then it can check out the servo valve control signal (S2-S2).