Our Company

Product Description

Products Introduce:

HRK series cutting machine is the upgrade of traditional ones. Adopted frame structure, this series make the overall stress relief tempered, bolts connecting with high strength , and the overall rigidity is good, and will gain less deformation. The beams of this series is solid without moving, the work piece material can be sent by the evacuation mechanism,and as for work tables, they were make of carbon tool steel, hardness of which can be 55-60HRC (ordinary table<30HRC)after high-frequency surface hardening, which makes the work table much harder than the hardness of stainless steel, and completely solve the phenomenon of the work surface grooves appeared due to low hardness of traditional machines, to ensure the work surface flatness ≤ ± 0.03mm, completely solve the reduction of the accuracy of the V-grooves due to deformation of work table surface, prolonged the life of the equipment. Around the work table there are care feeding device to prevent scratches during processing of sheet metal.

Products Feature:

1.The fuselage is welded with pure steel , and internal stress has been weakened after heating process, it has high strength and no deformation on the body of machine.
2. Applying the numerical control systems provided by Taiwan Yitu , so the technology is mature, and the performance of products is more stable and reliable.
3.The electronics are original products provided by the one of the three well-known global manufacturer-- Schneider, which can ensure life and stability of the circuit.
4.Using pneumatic control system of Taiwan Yadeke, clamping and release of the platen and jaws are fully automated, and the board will not get pined, the pressure is stable and reliable during the process.
5.Mitsubishi servo motor cutting feed, with high accuracy and is reliable, and the accuracy even be 0.01mm.
6.Mitsubishi servo motor control turret and feeding device, has accurate chipping and precise positioning.
7.As for Turret, it changed the traditional way to the way of forging nut screw drive steel rack and pinion, work together withprecise planetary gear of Li Ming Taiwan and servo motor power of Mitsubishi, which makes it easier to maintain, lower the failure rate, and makes it return faster, more efficient, and run more smoothly in a muted way.
8.work tables are made of carbon tool steel,the hardness of high-frequency surface can reach 55-60HRC (ordinary table<30HRC) after hardening 
9.work table surface is equipped with a mechanical compensation, after long-time use it can adjust error of depth of V groove 
10.Allowing using three knives to process "V" groove, thus the cutting amount can be allocated evenly,and the deformation of the workpiece can be reduced.

PRODUCT DETAILS

Leading DURMAPRESS CNC Stainless steel Sheet Metal Surface for V Cutting machine, V Grooving machine, 3200mm to 6000mm

This equipment is fully CNC V Groover Machine for metal sheet. It adopts advanced CNC system and innovative design with the advantages of high processing precision, 

simple operation, no noise, no vibration and so on. It is widely used in the sheet metal V-groove, U-groove and other irregular groove processing (including stainless steel, aluminum, aluminum plate, copper, iron, plastic, wood, acrylic panels and other special plates).Particularly.

 it is applicable to the V-groove processing of sheet metal before bending .

Main Device 

 Main parameters

Our Service

1). Quality assurance system
Company organizes the production as per ISO9001:2008 standard. From design control, process control, inspection control to delivery, installed and service, the whole process control. The running of quality system performs quality manual, procedure files, work instruction and related technical and management standard together with standard and regulation layout by company strictly. Quality system realizes whole screw and whole procedure control completely.

2). Quality assurance procedure for important out-source parts.

a. Mainly out-sourced parts: control system, cylinder, hydraulic components, motor, pump etc.

b. After evaluation, select qualified suppliers as business partners.

c. Purchasing according to plan, purchase contract, quality requirement, technical standard and inspection standard.

d. Receiving inspection on site either in supplier or our company with related technicians.

MACHINE QUALITY 

Machine design and manufacture performs occupation standard and comply with the requirement of quality, specification and characters herein this technical regulation.

Guarantee period start from the day the machine acceptance report signing. Period would be one year.

Technical documents which supplier in charge of furnish and handed to use should be consist with technical regulation, and throughout technical, technics, produce, installation and setting

After-sale-service
Manufacturer will in charge of the technical service for the whole using life of the machine.
If you want to know moe about the machine ,pls. contact with us freely.

Packing & Delivery

OUR WORKSHOP

FAQ :

Q: How to get a accurate quotation from us ?

 A:Prvide us the details of material , such as metal thickness and width .

 Q:You are manufacturer or trading company ?

 A: We are 100% manufacturer with 17 year's manufaturer experience.

 Q:Can you do OEM service ?

 A:Yes, we can. your design is accepted , your own logo can be used on the machine.

 Q:What's the shipping cost from china to your country ?

 A:We can send machine to your port or door address by sea or airplane. please kindly tell us your nearest       port or address with postcode. we have reliable shipping agent to  insure the safe convenient and time       delivery.

 Q:Do you accept LC payment ?

 A:Yes, normally our payment is 30%+70% ,LC payment is also acceptable

 Q:How to operate this machine ?

 A:Video line of our factory or we send you the moive directly.

 Q:What about commissioning service ?

 A: We can offer commissioning service , the buyer need to afford plane tickets.

 Q:Do you offer teaching & training ?

 A:Training at supplier's plant