Products Introduce:

HRK series cutting machine is the upgrade of traditional ones. Adopted frame structure, 

this series make the overall stress relief tempered, bolts connecting with high strength , 

and the overall rigidity is good, and will gain less deformation. The beams of this series 

is solid without moving, the work piece material can be sent by the evacuation mechanism,

and as for work tables, they were make of carbon tool steel, hardness of which can be 

55-60HRC (ordinary table<30HRC)after high-frequency surface hardening, which makes

 the work table much harder than the hardness of stainless steel, and completely solve 

the phenomenon of the work surface grooves appeared due to low hardness of traditional

 machines, to ensure the work surface flatness ≤ ± 0.03mm, completely solve the reduction

 of the accuracy of the V-grooves due to deformation of work table surface, prolonged the

 life of the equipment. Around the work table there are care feeding device to prevent 

scratches during processing of sheet metal.

Products Application:

Metal sheet grooving machine can V-groove stainless steel sheet, aluminum sheet, 

composite aluminum sheet, copper sheet and other metal sheets, making the arc radius

 of the edge of the bent workpiece extremely small, satisfying the needs of hotels, 

restaurants, restaurants, commercial buildings , Banks, airports and other places in

 the high-end decorative special needs.

Five System:

(A) Y-axis system

The Y-axis consists of ECMA-F21830 AC servo motor,star reducer, timing belts,

synchronous wheel, high-precision gear rack and pinion, linear guide parts.

Its function is that the servo motor drives the blades move straightly on a linear



guide through the star reducer together with fine gear, to provide the V groove

power.



(B) X-axis systems

The X-axis consists of E21320 AC servo motor, timing belts, synchronous wheel,

ball screw, linear guide,backgauge rack, draggingclamps and other component

parts.Its function is that servo motor drives the backgauge rack move straightly 

on a linear guide through timing belts and synchronous wheel driving ball screw, 

to provide precise positioning power to the the backgauge dragging clamps.



(C) Z-axis system

The Z-axis consists of C20604 AC servo motor, timing belts, synchronous wheel

ball screw, blade and other parts. Its function is that the servo motor drives the blade

move straightly on a linear guide through timing belts and synchronous wheel

driving ball screw ,to provide the blade precise positioning power.



(D) The pneumatic system

The pneumatic system were divided into two groups:the backgauge clamping tool

which provides the clamping force to drag and pressing tool pneumatic system which

provides the pressing force before V Groove.which provides the clamping force to drag.



(E) Electrical control system

The electrical control system consists of the PLC, driver, touch screen, electronic

control components, electrical cabinets and other accessories. The electrical cabinet

is installed within wallboard of the machine, easy for maintenance and protection.

Through the touch display, you can make full use of the equipment.





Products Feature:

1.The fuselage is welded with pure steel , and internal stress has been weakened 

after heating process, it has high strength and no deformation on the body of machine.

2. Applying the numerical control systems provided by Taiwan Yitu , so the technology 

is mature, and the performance of products is more stable and reliable.

3.The electronics are original products provided by the one of the three well-known 

global manufacturer-- Schneider, which can ensure life and stability of the circuit.

4.Using pneumatic control system of Taiwan Yadeke, clamping and release of the platen 

and jaws are fully automated, and the board will not get pined, the pressure is stable and 

reliable during the process.

5.Mitsubishi servo motor cutting feed, with high accuracy and is reliable, and the accuracy even

be 0.01mm.

6.Mitsubishi servo motor control turret and feeding device, has accurate chipping and precise 

positioning.

7.As for Turret, it changed the traditional way to the way of forging nut screw drive steel rack and 

pinion, work together withprecise planetary gear of Li Ming Taiwan and servo motor power of

Mitsubishi, which makes it easier to maintain, lower the failure rate, and makes it return faster, 

more efficient, and run more smoothly in a muted way.

8.work tables are made of carbon tool steel,the hardness of high-frequency surface can reach 

55-60HRC (ordinary table<30HRC) after hardening 

9.work table surface is equipped with a mechanical compensation, after long-time use it can 

adjust error of depth of V groove 

10.Allowing using three knives to process "V" groove, thus the cutting amount can be allocated

evenly,and the deformation of the workpiece can be reduced.

Products Configuation:

Pre-Sales Service 

* Training how to instal the machine, training how to use the machine. 

* Engineers available to service machinery overseas.

After-Sales Service

* Inquiry and consulting support. 

* Sample testing support. 

* View our Factory.

RFQ

Payment Terms:
T/T,L/C,D/P,D/A and soon on.You can consult with me,we will satisfy your needs.

Guarantee period:
Our product quality guarantee period is 24 months from B/L date. During guarantee period, 

we will provide spare
parts without any charge in case of quality discrepancy caused by us. If the malfunctions 

are caused by 
customers incorrect operations, we will provide customers spare parts at cost price.
We also can offer flexible extended warranties according to the actual situation. 

After-sales services:
Our engineer can go to your factory for installation and showing operation details on 

condition of you provide the
round-trip air tickets, visa formalities, food and accommodation.
In turn, your engineers can come to our factory for learning the installation, operation 

and maintenance for free.

Why Choose Us:
A.Our company is a real professional exporter and we specialize in manufacturing 
numerical control machine.
B.We must give you reasonable prices,because we want to become your sincere friend.