Durmapress Founded in 2006,Maanshan Durmapress CNC Machinery Co.,Ltd is located in

 the Maanshan city ,Dangtu County,close to Nanjing Airport. Our geographical position is 

superior and the transportation is very convenient. Our company covers an area of 160 acres 

with the registered capital of 32,000,000 Yuan. We have more than 320 employees, including 

all types of engineering and technical personnel, serving the company R&D, production, and 

customers' service. At the same time, we have our own sales companies in each major and 

medium city. 
Our main products are:CNC Press Brake,Guillotine Shearing Machine,Ironworker,power press ,

and rolling machine these sheet metal processing equipmments.we are using advanced 

technology from German,Japan,and Italy,France and so on.

The whole structure of the hydraulic press brake:
Welded structure: the stress of the welded parts can be eliminated by vibration; so this

 forging press gives high accuracy.
Frame: consists of right and left wall boards, working table, oil box, slot steel and etc. 

The stress of the welded parts can be eliminated by vibration. The machine enjoys high 

accuracy and high strength and can be transported easily.
High accuracy,high efficiency,simple and convenient operation,good performance, favorable

 price and best service.

1. Hydraulic system: 
Adopt integrated hydraulic control system, more reliable 
Be installed at the top of the oil box, which can assure that the cylinder is always full of 

oil when the slide is moving down at high speed 
Consist of motor, oil pump and valve groups 
Complete working cycle can be realized through the control of hydraulic valve. 
The working pressure at the right side of the wall board can be adjusted by the remote 

adjustment valve

2. Protective fence and the safety interlock 
Protective fence and the safety interlocker to ensure the operation safety. Power supply switch

 that is set in the electric box will be automatically turned off when the box's door is opened or

 the fence is turned up. Protecting barrier with safety interlocker is mounted on the back of the

 machine. Another, there are travel limit protection and foot pedestal mounted emergency off 

switch.

3.Synchro control system:
Slide syncho system: adopt steel torsion bar synchro system, simple in structure and high in

 accuracy 
2 ends of slide has 2 synchro fork which make,The system uses upper die compensation

 to improve the brake precision.
Adopt upper die compensation to improve the brake precision

4. Sectional Ram Clamp Bars:
Separate sectional clamping bars are supplied as standard equipment in order to securely 

fasten short dies, as well as standard length tooling. Unique crown correcting device is standard.

5. Advance technology and procedures:
This metal machining tool is a kind of steel torsion bar synchro press brake. -Electronic control

 of back gauges and ram stroke, data displayed and manual setting
Process of cylinder and sealing component:
Cylinder: no.45# steel treated, inner holes fine machined and extruded.
Valve rods: no.45# steel treated, nickel and phosphorous coated outside.


1.Main Features
1) hydraulic drive, the machine at both ends of the cylinder placed in the slider, direct

 drive sliding work.
(2) the use of mechanical block structure, stable and reliable.
(3) slider stroke maneuver fast tune, manual fine-tuning, counter display.
(4) the use of all welded structure, with sufficient strength and rigidity.
(5) The slider synchronization mechanism uses the torsion axis forcing synchronization.
(6) wedge-shaped deflection compensation mechanism to ensure a higher bending 

accuracy

2. Main Configuration
Estun E21 NC controller
Controller controls and adjusts Y-axis and X-axis
Servo drive and control positioning of X-axis and Y-axis
Adopting HIWIN ball screw and linear guide rail, accuracy 0.05mm
Front supporter bracket
Germany Bosch Rexroth hydraulic valve block
Germany EMB oil tube connector
Germany Siemens main motor
France Schneider electrics
Hydraulic & electrical overload protection
Upper and lower dies(86°, R0.6mm, material: 42CrMo)

3. Safety Standard:
1.EN 12622:2009 + A1:2013 2.EN ISO 12100:2010 3.EN 60204-1:2006+A1:2009
Front Finger protection ( safety light curtain )
South Korea KACON pedal switch ( safety grade 4 )
Back metal safeguard, CE standard
Safety relay monitor pedal switch, safety protection
Safety standard ( 2006／42／EC)

Our Service                                                                

Quality and Service Assurance:
1.we have Q & C department in our factory and our engineer have much 

experience and can design the suitable machine for our clients.
2.our machine can produce the nice production, can guarantee good quality.

the production is confirm to the national standard even the international 

standard
3.the products should not have scratch and the flatness
Technical R & D Department: design teams for different kind of production line.
package:
1.As to the roll forming machine's package, it should be nude.
2.we'll protect the machine well before shipment, to prevent machines from rusting 

and damage.
Repairs:
Warranty: 1 year since the date of B / L on
Installation and Commissioning:. We will send professional engineers to buyers' 

country for installation and commissioning Buyer pays each engineer 100USD / Day 

besides the round-tickets, room and board.

RFQ                                                                                 

Payment Terms:
T/T, L/C at sight are acceptable by us.

Guarantee period:
Our product quality guarantee period is 13 months from B/L date. During guarantee 

period, we will provide spare parts without any charge in case of quality discrepancy

 caused by us. If the malfunctions are caused by customers' incorrect operations, 

we will provide customers spare parts at cost price. We also can offer flexible 

extended warranties according to the actual situation. 

After-sales services:
Our engineer can go to your factory for installation and showing operation details 

on condition of you provide the round-trip air tickets, visa formalities, food and 

accommodation. In turn, your engineers can come to our factory for learning 

the installation, operation and maintenance for free.
Why Choose Us:
1. We will run the machine for a few days, and use your materials to do the test.

 Only guarantee the machine shows best performance, and then we will ship out.
2. Our elite teams can provide you professional, customized, and all-round services 

around the clock. If you need any help, contact us by WHATSAPP, Skype, Email or

 Telephone.
How can we provide you efficient services (metal processing solution):

There are Three Steps as following: 
1. Gather your requirements based on your real working situation. 
2. Analyze your information and provide our feedback. 
3. Offer options based on your specific needs. For instance, reg. standard products, 

we can offer professional recommendations; reg. non-standard products, we can offer professional 

designing.